Why Molybdenum Parts Fail Above the Glass Line

Nov 12, 2026

Leave a message

Why Molybdenum Parts Fail Above the Glass Line
 

 

 

 

Behaviour of molybdenum in molten glass has mostly been studied via electrode durability experiments and all agree upon this finding – the metal survives when wetted by the melt, but dies if it isn't. Corrosion rates in soda-lime melts over the temperature range 1000 to 1700 C are orders of magnitude lower than for fused AZS refractories, but specimens placed in the furnace atmosphere above the melt line lose wall section due to oxidation and sublimation of MoO3, never forming any protective film slowing down the process.

 

 

The length of life of an electrode is far less dependent upon the grade than on how well you hold the glass level. A steady level sees no wearing thin of the unsubmerged length but those with fluctuating level see all section loss right at the contact line. The submerged diameter stays close to nominal and what's above wears thin after only a few campaigns (each rewetting strips off the oxide band that was built up in the dry interval).

 

 

Even the heating current plays into the corrosion story. Glass conducts therefore the metal/glass interface carries current and attack occurs preferentially at places where the current density is highest rather than anywhere average. For electrodes running at uniform density the submerged section maintains its diameter, but wherever the current crowds the interface corrodes faster, attributable here to the electrolyte action of the conducting melt.

 

 

This pattern also holds true for thermocouple sheaths. Sheaths that are wetted remain intact, ones exposed above the melt oxidise and lose their wall thickness. The submerged length maintains its original section since oxygen simply is not there to react with the metal, explaining why sheaths installed a few centimetres too high will fail far ahead of the electrode next to them do.

     NAME

               Ava

      wechat

                18291778622    

       LinkedIn

                 ava20250912@gmail.com

        WhatsApp

                 +86 182 9177 8622

        E-mail

                Zr-Hf@titanmsgp.com

Send Inquiry