Chromium Dioxide Sputtering Target

Chromium Dioxide Sputtering Target
Details:
Product name :Chromium dioxide sputtering target
Material :chromium dioxide (Cr₂O₃) +OFHC 101 oxygen-free copper backing target
MOQ :1 Piece
Bonding: Elastomer bonded, not brazed
Supply with 6-32 UNC mounting screw
Send Inquiry
Description
Send Inquiry

Chromium dioxide sputtering target

 

Chromium dioxide sputtering target


The chromium dioxide (Cr₂O₃) sputtering target main material is 99.8% - 99.9% high-purity chromium dioxide. The product is made using a direct pressing process, which is a plain pressed blank, without the need for sintering or heat pressing.

The target material is bonded to the OFHC 101 oxygen-free copper backing target using elastic adhesive; then, it is fixed with 6-32 American standard screws. The overall design is compatible with the US Gun type magnetron sputtering gun.

Currently, the regular target material specifications required by our customers include a chromium dioxide target with a diameter of 76.2mm and a thickness of 3.175mm. The tolerance of the target material is usually controlled within ±0.5mm, and the tolerance of the oxygen-free copper backing target is ±0.5mm. Special requirements can also be processed according to the customer's specific requirements.

Due to the high hardness, wear resistance, corrosion resistance, high-temperature resistance, and good chemical stability of the Cr₂O₃ film, it is usually a commonly used ceramic target material for vacuum sputtering coating.

 

 
 
comparison of product parameters
Products name chromium dioxide (Cr₂O₃) sputtering target
Products main material  chromium dioxide Cr₂O₃
Products material purity 

Target purity: Cr₂O₃ ≥ 99.8% ~ 99.9%**
Total impurities ≤ 0.2% (minimum 0.1%)

Density  5.21 g/cm³
Melting point  2435 ℃
Expansion coefficient 7.5 ×10⁻⁶ /℃
Mohs hardness: 8 - 8.5 (very hard)  8~8.5
Reference Diameter  76.2mm ; Diameter tolerance is +/-0.5mm
Reference Thickness  3.2mm ; Thickness tolerance is +/-0.5mm 
MOQ  1 Piece 
With screw or not  Yes 

 

chromium dioxide (Cr₂O₃) sputtering target production process of chromium dioxide sputtering target material

 

1. First, raw material preparation: We need to strictly inspect and sieve the high-purity Cr₂O₃ powder, strictly controlling the particle size and fluidity of the powder;


2. Mixing and granulation process: This mainly involves adding a small amount of molding additives to the powder to increase its viscosity for granulation, which can better ensure the formation of the pressed blank without cracking;

 

3. Then, use cold pressing molding molds or isostatic pressing to press into a φ3.00" × 0.125" blank.

 

4. After isostatic pressing, inspect the pressed blank, mainly by inspecting the size of the blank and conducting an external appearance check to check for cracks and whether there is any shortage of material.

 

5. Finally, use the bonding binding process to bond the chromium dioxide target material and the oxygen-free copper OFHC101 target material using a strong elastic adhesive.

 

 
 
comparison of Elastomer bonded and Brazed
Comparison item Elastomer bonded Brazed
Combination method Organic glue physical bonding, with elastic glue layer Melted solder metallurgical welding, rigid connection
Maximum temperature resistance Low, generally the continuous working temperature is ≤ 120–150℃; if the temperature is too high, the glue will age, peel off, and release gas High, can withstand 400–700℃, suitable for high-power sputtering
Thermal stress The adhesive layer buffers the thermal expansion difference between the ceramic and copper, making it less prone to cracking; it is particularly suitable for unglazed, low-density, brittle ceramic targets  During high-temperature brazing, the difference in expansion coefficients between the ceramic and copper is significant, causing the brittle target to easily crack; directly brazing the unglazed substrate will basically shatter
Vacuum coating The adhesive is an organic substance. It will release gas in a high vacuum environment. It is suitable for low-power, process testing, and scenarios where the requirement for vacuum background is not extremely strict. Inorganic solder has very low gas release. It is suitable for high vacuum, semiconductors, and high-precision optical coating.
Processing technology Room temperature bonding, simple process, lower cost; cannot be subjected to high-temperature treatment High-temperature brazing, high requirements for fixtures and atmosphere, higher cost; temperature control and crack prevention are necessary
Repairability Can be disassembled and the adhesive removed, and the back plate can be reused Brazed together, difficult to disassemble, and the target/back plate will basically be scrapped upon disassembly
Power limit Low-power sputtering cannot operate at high power for a long time Supports high-power, long-term continuous sputtering for mass production


 

applications of chromium dioxide (Cr₂O₃) sputtering target
modular-1

1

 

The primary application is for the laboratory / during the process exploration stage of research and development.

2

 

Low-power intermittent sputtering to deposit Cr₂O₃ functional films.

3

 

Used for powder sputtering and the research on the basic mechanism of film formation.

 

 

How To Cooperate With Us?

When you have the product need regarding chromium dioxide (Cr₂O₃) sputtering target , pls contact the person : 

                Tracy Zhang 

Our address

Baoji city, shaanxi province ,China 

Phone Number/ Whatsapp 

0086-18291730106

modular-1

 

 

 

Hot Tags: chromium dioxide sputtering target, China chromium dioxide sputtering target manufacturers, suppliers, factory, chromium, Chromium Round Target, chromium target

Send Inquiry