Some Common Surface Treatments
1. Galvanized features: low cost, divided into white zinc/color zinc/black zinc, low hardness, non-wear-resistant effect: static structural parts base anti-rust Note: cannot be used for sports parts Actual combat cases: rack, bolts, support feet selected color zinc
2. Nickel plating (bright nickel) Features: delicate and bright surface, good oxidation resistance, medium hardness Function: exposed precision parts, anti-rust and appearance Attention: not resistant to high-speed and heavy-duty sliding Actual combat cases: small equipment adjustment parts, precision small shafts
3. Chromium plating (hard chromium/decorative chromium) features: high hardness, wear and corrosion resistance; Decorative chromium is thin, hard chromium is thick Function: sliding working face Note: high price, too thick coating is easy to collapse Edge Practical cases: guide pillar, pin shaft, slider face hard chromium
4. Features of copper plating: soft texture, good conductivity, easy oxidation and blackening Effect: electroplating base, conductor Note: not used as outer coating alone Practical case: copper plating base for high-requirement parts
5. Characteristics of ordinary aluminum anodizing: aluminum special, film layer and substrate integrated, coloring effect: aluminum rack, panel protection and beautification Attention: thin film layer, easy to be damaged by bumps Actual combat cases: aluminum frame, operation panel black positive
6. Hard anodizing characteristics: thick film, high hardness, strong wear and corrosion resistance Effect: aluminum sliders, tooling fixtures Note: high cost, sharp corners are easy to ablate Practical cases: aluminum sliders, tooling hard oxygen
7. Features of electroless nickel plating: no need to electrify, uniform plating of complex workpieces: special-shaped, inner cavity precision parts Note: the price is higher than ordinary nickel plating Practical case: precision valve body with inner hole
8. Blackening (bluing) Features: extremely thin film, almost no change in size, matte black effect: steel body short-term anti-rust Note: must be soaked in oil, easy to rust Practical cases: internal tooling pad, positioning pin
9. Phosphating characteristics: conversion film, good lubrication, strong adhesion Effect: priming and lubrication pretreatment before spraying Note: poor rust prevention alone, need to be oiled
10. Dacrot point: zinc-aluminum coating, strong salt spray performance, no hydrogen embrittlement effect: outdoor and seaside high anti-corrosion parts Note: rough surface, not suitable for surface Practical case: anchor bolts for outdoor equipment
11. Features of Teflon spraying: low, non-stick, acid and alkali resistance Action: anti-stick, corrosion-resistant Working face Note: easy to scratch, not resistant to heavy load Practical case: food equipment anti-stick pressure plate
12. Tin plating features: soft plating, good solderability, good conductivity Effects: electronics, wiring conductors Note: low hardness, non-wear-resistant Practical cases: wiring copper bars, connector contacts
13. Silver plating features: excellent conduction and heat conduction, easy vulcanization and blackening Effect: large current electrical contacts Note: high cost, easy to change color Practical case: conductive contacts of high-frequency equipment
14. Titanium plating features: high hardness, wear-resistant and corrosion-resistant effect: wear-resistant layer of dies and tools Note: very expensive, thin coating Practical case: small stamping punch titanium plating


