Why is it not easy for molybdenum mesh to collapse during high-temperature sintering?

Nov 04, 2026

Leave a message

Why is it not easy for molybdenum mesh to collapse during high-temperature sintering?
 

 

 

 

In powder metallurgy and high-temperature sintering processes, support screens or filter screens need to withstand repeated heating and cooling over many years. After a period of time, many stainless steel wire meshes will expand, partially collapse, or even sag entirely, directly affecting screening accuracy and product consistency. Therefore, custom-made molybdenum wire mesh is required.

 

 

Molybdenum mesh is more stable in this issue. Molybdenum by itself shows good resistance against creeping: atoms move very slowly at high temperature, and it does not easily elongate or soften slowly. After many thermal cycles, there are only small changes in size for the mesh which allows leveling of the support surface. In some cases where precision regarding powder size or material delamination is required, such stability is even more important than just having a high-temperature resistance.

 

 

In actual use, many users of sintering furnaces and push-plate kilns have found that after replacing molybdenum mesh, the replacement cycle is significantly extended, and the problem of material leakage or mixing caused by mesh surface deformation is also reduced. Of course, molybdenum mesh is more suitable for vacuum or protection, and surface protection still needs to be paid attention to under strong oxidation.

 

 

When selecting the type, focus on the use temperature, type, and mesh accuracy requirements, not just the price. The molybdenum mesh can save a lot of trouble in high-temperature screening and support links.

     NAME

               Ava

      wechat

                18291778622    

       LinkedIn

                 ava20250912@gmail.com

        WhatsApp

                 +86 182 9177 8622

        E-mail

                Zr-Hf@titanmsgp.com

Send Inquiry