Seven kinds of treatment of metal surface
Our commonly used metal materials include iron, aluminum, copper, etc. These metals have active chemical properties. If they are in the air, their surfaces will be oxidized or even corroded, which seriously affects the performance of materials. Therefore, in order to make these metal materials more durable and beautiful, their surfaces are usually treated to achieve the purpose of prolonging service life and aesthetics.
There are many types of metal materials, and their surface treatments are also many and have their own characteristics. Here are 7 common surface treatments.
1. Brush anti-rust paint:
Anti-rust paint is a kind of coating that can protect metal surfaces from chemical or electrochemical corrosion of atmosphere, sea water, etc. It is mainly divided into two types of anti-rust paint: physical and chemical. The former relies on the appropriate cooperation of pigments and paints to form a dense paint film to prevent the invasion of corrosive substances, such as iron red, aluminum powder, graphite anti-rust paint, etc., while the latter relies on the chemical anti-rust effect of anti-rust pigments, such as red dan, zinc yellow anti-rust paint, etc.
Features: Transparent color, strong coating adhesion, but most anti-rust paint price is high, poor durability, anti-rust effect is not good, easy to fall off after a long time.


2. Electroplating process:
Electroplating refers to a kind of surface processing method in which the cations of the pre-plated metal in the plating bath are deposited on the surface of the substrate metal through electrolysis in the salt solution containing pre-plated metal, with the substrate metal as the cathode. The performance of the coating is different from that of the substrate metal, and has new characteristics. According to the function of the coating, it is divided into protective coating, decorative coating and other functional coating.
Features: High strength, strong wear resistance, strong heat dissipation, strong corrosion resistance. However, the electroplating solution contains toxic substances, and the discharged waste water and waste gas are harmful.
3. Etching process:
Etching is mainly divided into dry etching and wet etching. Dry etching mainly uses reactive gas and plasma for etching, and wet etching mainly uses chemical reagents to react with the etched material for etching. In fact, whether it is chemical corrosion or electrolytic corrosion, the principle is very simple, that is, to cover the places that do not need to be corroded, and to use different templates to corrode different patterns.
Features: Etching lines can be artificially controlled, strong design. However, the cost is high, and the chemical substances are easy to remove the substrate material under the mask material during wet etching.


4. Etching process:
Corrosion technology is to beat the metal surface with a chemical potion, and artificially corrode the metal surface. The flowing metal pattern is the result of the potion corrosion. Because the potion flows unevenly on the flat plate, there will be irregular textures. In order to make the pattern more natural, it will be polished by hand, leaving only some looming textures in the end. Its principle is that through artificial control, a complete and dense protective layer is corroded out of the metal surface, so as to achieve the purpose of protecting the metal.
Features: Low cost, bright colors, eroded out of the effect of a very artistic sense. However, the chemical potion used is harmful to the human body. Due to the uneven flow of the potion, the degree of corrosion on the metal surface is inconsistent, and the thickness of the protective layer is uneven.
5. Wire drawing process:
The wire drawing process, also known as the frosting process, is usually a method of using a mechanical metal surface. After processing, the surface state is straight and curved. It includes hair patterns, satin patterns, coarse satin patterns, horizontal patterns, cross patterns, cross patterns, stacked patterns and so on.
Features: It can well cover up the mechanical grain and mold closing defects in production, the appearance is fashionable and beautiful, and the performance is superior. It has the characteristics of anti-rust and anti-oxidation. However, it is picky about where it is located, and it needs to be placed in a place that will not be often wet and moisture will not be too heavy to maintain the stability of the product; And the price is expensive, suitable for pursuing ultra-high-end decoration that synchronizes with the world's popularity.


6. Sandblasting process:
Sandblasting is powered by compressed air to form a high-speed jet beam to spray materials (copper ore, quartz sand, emery, iron sand, sea sand) on the surface of the workpiece to be treated at high speed, so that the appearance or shape of the workpiece surface changes. Due to the impact and cutting effect of abrasive on the workpiece surface, the mechanical properties of the workpiece surface are improved, so the fatigue resistance of the workpiece is improved, the adhesion between it and the coating is improved, the durability of the coating film is prolonged, and it is also conducive to the leveling and decoration of the coating.
Features: Roughness selection, high efficiency, strong versatility. However, it is easy to attach dust and inconvenient to clean.
7. Alloy catalytic process:
Alloy catalysis refers to a surface processing method in which metals form plating coatings through infiltration and deposition through replacement reaction under catalysis, which overcomes many defects such as bad construction, leaky plating in electroplating technology, and uneven plating coatings. The alloy catalytic liquid developed by our company is composed of environmental protection, energy saving, wear resistance, corrosion resistance and many other advantages, which has been praised by the industry, and has passed the management system certification, conforms to the EU ROHS access standard, and is very popular in the surface treatment industry. welcome.
Features: High bonding strength with metal substrates, stable performance, good at handling various deep holes, blind holes, complex work-pieces, good cladding, high hardness of coating, high wear resistance and corrosion resistance.



