Products Description
Before introducing 99.95% Mo welded crucibles, it is helpful to outline the physical and chemical properties of metallic molybdenum. Molybdenum is a silvery-white metal distinguished primarily by its exceptionally high melting point reaching 2622°C and a boiling point of 4639°C; among naturally occurring metals, it ranks just below tungsten, rhenium, and tantalum in this regard. With a density of 10.28 g/cm³ at 20°C-roughly half that of tungsten-molybdenum offers a significant weight advantage while delivering comparable high-temperature performance. Additionally, molybdenum exhibits high thermal conductivity and an electrical resistivity of 5.2 × 10⁻⁸ Ω·m at room temperature. It retains high strength and hardness at elevated temperatures, possesses excellent creep resistance, and is suitable for operating temperatures ranging from 1100°C to 1800°C. Molybdenum is highly stable at ambient temperatures; it does not oxidize in air, is insoluble in water, and demonstrates excellent corrosion resistance against mineral acids. It remains relatively inert in hydrogen, ammonia, and nitrogen atmospheres up to approximately 1100°C and offers outstanding resistance to erosion by molten metals, strong acids, and strong alkalis, effectively preventing the introduction of impurities. It should be noted, however, that molybdenum oxidizes to form molybdenum trioxide (MoO₃) at temperatures above 600°C; consequently, high-temperature applications typically require a vacuum or an inert atmosphere for protection. As a result, 99.95% Mo welded crucibles have become indispensable core components in the fields of high-temperature smelting and precision crystal growth.


A high-temperature-resistant vessel fabricated by welding molybdenum plates or tubes. Compared to sintered or stamped crucibles, 99.95% Mo welded crucibles offer significant advantages in terms of structural design and dimensional flexibility. Due to the high sensitivity of molybdenum to oxygen and its tendency to oxidize rapidly at high temperatures, Tungsten Inert Gas (TIG) welding is typically employed. This process establishes an arc between the tungsten electrode and the workpiece while using argon-an inert gas-to shield the weld pool, thereby preventing oxidation and nitridation. Key process characteristics include: controllable heat input (achieved by adjusting current and welding speed to prevent overheating and deformation of the molybdenum); high weld quality (resulting in a clean weld with minimal defects thanks to argon shielding); and strong versatility (capable of welding molybdenum plates ranging from 0.5 to 4 mm in thickness to meet various crucible specifications). Critical process parameters involve a welding current of 80–400 A (adjusted based on plate thickness), pre-welding evacuation to a level of -0.5 to -0.8 MPa, and argon backfilling to a gauge pressure of -0.005 to 0 MPa. Following welding, the component undergoes staged heating to approximately 1500°C for heat treatment to relieve welding stresses and improve microstructural uniformity.
product parameters
| Common Grades | Mo1, TZM, MoLa |
| Purity | ≥99.95% |
| Density | ≥9.8 g/cm³ |
| Tensile Strength | >800 MPa |
| Operating Temperature | 1100°C–1800°C (up to over 2000°C) |
| Wall Thickness Range | 0.5–8 mm (customizable) |
| Diameter Specifications | Φ20–300 mm (customizable per drawings) |
| Surface Finish | Black (as-rolled), alkali-washed, polished, ground |
| Welding Methods | TIG welding, electron beam welding, laser welding |

Hot Tags: 99.95% mo welded crucible, China 99.95% mo welded crucible manufacturers, suppliers, factory

