Pure tungsten wires
What are the common grades of pure tungsten wire?

There are Three different grades of pure tungsten wire. The main difference lies in the amount of tungsten content. The first one is high-purity tungsten wire, with a tungsten content of 99.95% or more. We call it W1. The pure tungsten wire of this grade has strict control over the content of single impurities such as C, N, O, Mo, Fe, Si, etc. during the formation process. The upper limit of their content is less than or equal to 0.01%. At the same time, the gas impurity content of W1 pure tungsten wire is also very low. Therefore, usually, this high-purity grade of tungsten wire is mainly used in the coating field, especially when this pure tungsten wire is made into twisted wire as a heating source, it is more suitable for use in resistance evaporation PVD vacuum coating, rather than sputtering coating. Among them, aluminum vapor coating is one of the largest usage scenarios. W1 high-purity pure tungsten wire can be used in vacuum coating, as well as in semiconductor and high-temperature vacuum furnaces, hydrogen gas sintering furnaces. Because its melting point is extremely high, up to 3410℃, and the high-temperature vapor pressure is very low, and it has few impurities, its characteristics of low gas release make it more suitable for use in working conditions with requirements for cleanliness and no impurity pollution.

The second grade of pure tungsten wire is W2, which is the industrial pure tungsten wire commonly used in industry. The tungsten content of this grade of wire is slightly lower than that of W1 pure tungsten wire. The tungsten content is greater than or equal to 99.92%, the upper limit of single type impurities is less than or equal to 0.01%, and the total impurity content is less than or equal to 0.08%. The impurity content standard is relatively more lenient than that of W1, and the cost performance is also higher than that of W1. Therefore, it is widely used in industrial heating and wire-wound evaporation sources, which are commonly used grades in industrial decoration and packaging coating. Because the impurity standard of W2 pure tungsten wire is more relaxed than that of W1, W2 pure tungsten wire is more suitable for mass production of ordinary industrial decoration and packaging coating. If high-end optical and semiconductor precision coating is required, a higher purity W1 high-purity tungsten wire should be selected.
The third type is ultra-high purity tungsten wire, which is a relatively small amount of custom-made ultra-high purity tungsten wire. The tungsten content is 99.99% (4N-W). Its application scope is also rather niche, mainly used in some scientific research and specialized fields of electron emission. Therefore, the order quantity of this type of tungsten wire is relatively small, and it is mostly customized production, resulting in higher price and cost, as well as longer delivery time.
Comparison Table of Tungsten Wires: 1 / W2 / WAL1
| Grade | W1 | W2 | WAL1 |
| Chemical composition | W ≥ 99.95%; total impurity content ≤ 0.05%, single impurity ≤ 0.01%, no intentionally added doping elements | W ≥ 99.92%; total impurity content ≤ 0.08%, single impurity ≤ 0.01%, no intentionally added doping elements | W ≥ 99.95%; Potassium (K) is added as a doping phase, and potassium is not counted as an impurity. The total impurity content is ≤ 0.05%. |
| Material Physical properties | Melting point 3410°C; extremely low high-temperature vapor pressure; low outgassing rate; high brittleness after high-temperature recrystallization, prone to wire breakage after multiple thermal cycles; stable resistance | Melting point 3410°C; outgassing slightly higher than W1; becomes brittle at the same high temperature recrystallization; good workability, suitable for twisted wire forming | Melting point 3410°C; potassium gas bubbles pin grains, providing creep resistance and sag resistance;Not easy to deform after repeated high-temperature cycles; excellent wire-wrapping forming performance |
| Product Advantages | High purity and minimal gas release prevent contamination of furnace workpieces and thin films; suitable for scenarios with strict cleanliness requirements; excellent high-temperature stability | High cost-performance and low mass production costs; smooth formation of twisted wires, suitable for batch coating of heating elements; stable performance under conventional vacuum evaporation conditions | It has excellent anti-sagging and anti-creep properties, making it resistant to deformation during prolonged high-temperature operation. Its service life is significantly longer than that of pure tungsten wire, making it suitable for continuously excited light-emitting filaments. |
| Main applicable scenarios | High-purity vacuum furnace heating elements, semiconductor/optical boule hanging and binding wires, high-end precision coating evaporation sources, electron gun filaments, research instrument heater wires | Vacuum thermal evaporation tungsten wire heaters (for aluminum, chromium, tin, silver evaporation), ordinary vacuum furnace heating wires, industrial high-temperature fixture binding wires (with the largest market coating usage) | Halogen lamps, incandescent lamps, special lighting filaments, electron tube heating filaments for long continuous operation; conventional evaporation coating is not recommended |
Contact person : Tracy Zhang
Our address
Baoji city, shaanxi province, China
Phone Number/Whatsapp
0086-18291730106

Hot Tags: pure tungsten wires, China pure tungsten wires manufacturers, suppliers, factory, tungsten wire, W1 Tungsten Wire


